Paxar FreshMarx System Monarch 9416 Equipment Manual page 6

C o n n e c t i n g t h e P r i n t e r ' s P o w e r S u p p l y
To connect the power supply to the printer:
Do not touch the electrical connectors while
setting up the printer. Electrostatic discharge
can damage or destroy the printhead or
1. Place the printer on a table in a location that
allows easy access to the front of the printer.
Never operate the printer resting on its side
Note:
or upside down.
2. Turn off the printer. Press the power switch on
the back of the printer to the off (O) position.
3. Place the power supply in a suitable location,
preferably on a table, near an electrical outlet.
4. Plug the three-hole end of the AC adapter cable
into the three-pronged outlet in the printer's power
supply.
The printer's power supply uses a different
voltage than the keypad. To connect the wrong
power supply could permanently damage the
1-2 Getting Started
Caution
electronic components.
Caution
keypad or the printer.