Paxar FreshMarx System Monarch 9416 Equipment Manual page 10

4. Remove a supply holder guide from one end of the
supply holder. The supply holder is normally
attached with a line to the inside of the printer.
Supply Holder Guides
5. Slide a roll of labels onto the supply holder.
If the core diameter on your roll of labels is 1
Note:
inch in diameter, remove the 1.5-inch supply
core adapters from the supply holder guides.
6. Slide the supply holder guide back onto the end of
the supply holder.
1-6 Getting Started
Supply Holder
1.5" Supply Core
Adapter