Removing The System Board - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

6. Connect the cables to the system board.
7. Connect the battery cable to the battery board connector on the system board.
8. Install:
a. battery cable
b. WWAN card
c. WLAN card
d. antenna routing bracket
e. hard drive
f. MEMS board
g. USH board
h. GPS module
i. docking board
j. base cover
k. battery
9. Follow the procedures in

Removing the system board

1. Follow the procedures in
2. Remove:
a. battery
b. base cover
c. docking board
d. USH board
e. MEMS board
f. hard drive
g. battery cable
h. card bracket
i. memory module
j. antenna routing bracket
k. WLAN card
l. WWAN card
m. heatsink
n. battery connector
o. SIM Board
p. keyboard
q. display cable
3. Disconnect the ribbon cables from the system board [1, 2, 3, 4].
44
After Working Inside Your
Before Working Inside Your
Computer.
Computer.