Installing The Card Bracket - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

c. Flip the card bracket [3].
5. To remove the card bracket:
a. Disconnect the cable from the connector [1].
b. Lift and remove the card bracket from the computer chassis [2].

Installing the card bracket

1. Place the card bracket in the slot on the computer chassis.
2. Connect the cable to the connector on the card bracket.
3. Flip the card bracket and place the card on the slot.
4. Tighten the screws that secure the card bracket.
5. Route the cables through the routing channels.
43