Installing the battery cable
1.
Connect the battery cable to the connector on the system board.
2.
Install the:
a.
base cover
b.
battery
3.
Follow the procedure in
Removing the battery connector
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
base cover
c.
battery cable
d.
docking board
e.
GPS module
f.
USH board
g.
MEMS board
h.
hard drive
i.
card bracket
3.
To remove the battery connector:
a. Remove the screws that secure the battery connector board to the computer [1].
b. Lift and remove the battery connector board from the computer [2].
38
After working inside your
Before Working Inside Your
computer.
Computer.