Installing The Power Connector - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

a. battery
b. base cover
c. docking board
d. GPS module
e. USH board
f. MEMS board
g. hard drive
h. card bracket
i. memory module
j. antenna routing bracket
k. WLAN card
l. WWAN card
m. heatsink
n. battery cable
o. battery connector
p. SIM Board
q. system board
3. To remove the power connector:
a. Remove the power connector cable from the adhesive [1].
b. Pull the power connector from the slot to release it from the computer chassis [2].

Installing the power connector

1. Insert the power connector by aligning it with the connector side with the base of the computer
chassis.
2. Press to firmly secure the power connector to the computer chassis.
3. Install:
a. system board
b. SIM board
c. battery connector
49