Siemens 7SG11 Manual page 56

7SG11Argus
Overcurrent Protection Relays
Document Release History
This document is issue 2013/04 The list of revisions up to and including this issue is:
2013/04 Typographical modifications
2010/02 Document reformat due to rebrand
2008/11 Sixth issue: Instrumentation claims updated.
2007/02 Fifth issue: Thermal withstand and O/C operate claims updated to new std.
2006/03 Fourth issue: O/C Element reset levels updated
2006/03 Third issue: Editorial modifications, software revision histories updated.
Second issue: Modification of CBF feature, DTL timers extended, CT Failure added, Auto Reclose
sequence settings modified.
2004/05
Modbus protocol included and additional metering included (not available in Argus 4 and Argus 6).
2002/12 First issue
Software Revision History
The copyright and other intellectual property rights in this document, and in any model or article produced from it
(and including any registered or unregistered design rights) are the property of Siemens Protection Devices
Limited. No part of this document shall be reproduced or modified or stored in another form, in any data retrieval
system, without the permission of Siemens Protection Devices Limited, nor shall any model or article be
reproduced from this document unless Siemens Protection Devices Limited consent.
While the information and guidance given in this document is believed to be correct, no liability shall be accepted
for any loss or damage caused by any error or omission, whether such error or omission is the result of
negligence or any other cause. Any and all such liability is disclaimed.
©2013 Siemens Protection Devices Limited
7SG11 Argus Technical Reference