Table of Contents
Advertisement
Paxar Monarch 9640 Series
Printer Driver Installation
5
Drivers are available for Window 3.1, 95, 98 and Windows NT V3.51/ 4.0. Insert printer
driver disk into the floppy disk drive.
For Windows 95/NT4.0...
Click 'Start'
Select 'Settings'
Select 'Printers'
Double click Add Printer icon
Click 'Next' button
Specify Network or Local printer (normally Local)
Click 'Next' button
Click 'Have Disk' button
Enter floppy drive and operating system A:Win95
Click 'OK' button
Select Printer Label Dr 200 for 9642 or select Printer Label Dr 300 for 9643
Click 'Next' button
Select communication port. For parallel port this is normally 'LPT1': 'LPT2': or 'LPT3:'
If you are unsure try LPT1:
For serial port this is normally COM1: or COM2:
Parameter Settings:
To change parameter settings:
Click 'Start' 'Settings' 'Printers'
Double click 'Label Dr' icon
Click 'Printer'
Click 'Properties'
After entering the Properties you can change the following parameters:
Details
Printer port, Printer driver
Paper
Paper Source (Stock Type), Media Choice (Contrast Setting), More Options -Enable the
optional Cutter or Peeler
Device Options
Print Speed (max. 2 or 3 ips dependent upon model)
Operators Handbook
9640 Series
6
English
Advertisement
Table of Contents
