Miscellaneous Control Characters - Paxar 9430RX Programmer's Manual

M i s c e l l a n e o u s C o n t r o l C h a r a c t e r s
You may need to use some of these miscellaneous control characters in your
data streams.
Char. Hex
BS 0x08
CANCEL 0x18
EOT 0x04
2-10 Configuring the Printer
Control Action
Removes the last character entered in the print buffer.
Re-initializes the printer. We recommend that you begin all data
streams with this command.
Sent by the printer to indicate the buffer is empty and the printer
is idle (End Of Text).