Modifying Standard Fonts; Standard Fonts; Modifying Fonts - Paxar 9430RX Programmer's Manual

M O D I F Y I N G S T A N D A R D F O N T S
You can modify the printer's standard fonts by redefining the characters.
NOTE: Each time you modify a font, it replaces the current font
definition. The only way to return to the default font is to reload the
original definition.
S t a n d a r d F o n t s
The following fonts are standard in the printer. Standard Bold is the default.
Before you start any modifications, note the maximum size of characters in the
font you want to use.
Font Name
Reduced Normal
Reduced Bold
Standard Normal
Standard Bold
Large Normal
Large Rotated
(90 degrees
clockwise)
M o d i f y i n g F o n t s
To modify a font:
1. Define a new character.
2. Select a character set to modify.
3. Load the new character.
4. Save the modified font.
Pitch
24 CPI normal
21 CPI normal
19 CPI normal
16 CPI normal
12 CPI normal
13 CPI rotated
Columns Character
per Line Size (WxH)
72 8x23
63 9x23
57 10x23
48 12x23
32 16x23
32 (rows 14x16
per line)
B
Syntax
ESC k5
ESC k4
ESC k3
ESC k2
ESC k1
ESC k0
Modifying Standard Fonts B-1