Using Different Size Supply Rolls - Paxar 9430R Operator's Handbook Manual

U s i n g D i f f e r e n t S i z e S u p p l y R o l l s
The printer can use one, two, or three-inch wide supply
rolls. However, you need to order the supply guide
adapter if you are using one or two-inch wide supply.
Make sure the supply is left-justified inside the printer.
For one-inch wide supply:
Insert the adapter into the left slot as shown.
Supply
Sensor
For two-inch wide supply:
Insert the adapter into the right slot as shown.
Supply
Sensor
NOTE: The supply sensor is located on the left side by
the printhead.
Loading Supplies 2-3