Staple Jam - Lexmark XS795dte Quick Reference

2
Firmly grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3
Close the paper transport unit door.
4 From the printer control panel, touch Continue, jam cleared.
431–438 paper jams
1
Push down the button to slide the output finisher to the right.
2
Open the finisher door, and then removed the jammed paper.
Note: Make sure all paper fragments are removed.
3
Close the finisher door.
4
Slide the finisher back until it clicks in place.
5
From the printer control panel, touch Continue, jam cleared.

455 staple jam

1 Press the latch to open the stapler door.
Note: The stapler door is located behind the finisher.
2
Lower the latch of the staple cartridge holder, and then pull
the staple cartridge holder out of the printer.
Clearing jams
18
3
Use the metal tab to lift the staple guard, and then remove any
jammed or loose staples.
4
Close the staple guard.
5
Press down on the staple guard until it clicks into place.