Play Mode - Zoom 9030 Operation Manual

The functions of the Play mode are fully explained in this
section.
(1) Patch name
(2) Output mode
(3) Master level (volume)
Functions of the Play mode
The Play mode is the basic mode of the 9030 in which
Patches
are
selected and played. The following operations
can be done in the Play mode:
Selecting Patches
Bypassing all effects
Manually changing the master volume
Setting the 9030 to the Play Mode
When 9030 is in another mode, press the EXIT key repeated-
ly until the Play mode is selected. You can also turn the
power off and back on again; when the power is turned on,
the 9030 is automatically set to the Play mode.
Effect indicator
--
Erfect modules which are currently on in
the selected Patch light up in red. Modules which are off in
the Patch light up in green.
Selecting Patches
Use the PATCH
VIA keys to select a Patch.
Press the PATCH A key once to select the next highest Patch
number, and press the PATCH V key to select the next low-
est Patch number. The values "wrap around"; if Patch num-
ber 99 is currently selected and you press the PATCH A key,
Patch number 1 will be selected. Similarly, if Patch number
1 is selected and you press the PATCH V key, Patch number
99 will be selected.
Display of the Play mode
The following information is displayed on the panel fiom the
Play mode.
PATCH NO. indicator
--
This indicates the selected Patch
number (1 - 99).
Display
--
The following information is shown in the FL
display:
Patch number
Effect module ON
Patch name indication (red)
Hi-Z S ~ M L
INPUT PHONES
D S P
I
ADVANCED PITCH2
I
j[_
I
LIN/ST LVL 100
mEq
i
1
BYPAS
1
E]
COMPARE EXECUTE
0 0
PAGE
0 0 -
A
Output mode Master level Effect module OFF
indication (green)