Rear Panel - Zoom 9030 Operation Manual

Rear Panel
(1 )
AC adaptor terminal
For connection of the included AD0002 AC adaptor.
(2) REMOTE IN termlnal
For connection with a controller equipped with a ZOOM
remote out terminal, such as the optional 8050 Advanced
Foot Controller.
(3) MlDI terminals
For connection to other MlDI devices, such as a synthesizer
or to a computer (via MIDI interface). These are used for
remotely controlling the 9030 from a synthesizer, or for stor-
ing
data
of the 9030 to a computer.
(4) OUTPUT terminals
For connection
to
an amplifier/speaker system, mixer, etc.
The method of output changes depending on the output mode
(
See page 44 )selected.
(5) EXTERNAL SENDlRETURN terminal
For connection of an external effect device. The 9030 can
memorize the setting of the signal level sent to the connected
external effect, as well as the ONIOFF status of the effect.
(6) INPUT terminal
For connection of musical instruments with relatively low
output impedance, such
as
a synthesizer or rhythm machine.
This terminal cannot be used simultaneously with the Hi-Z
INPUT terminal on the front panel. When both terminals are
connected, the Hi-Z INPUT terminal has priority.
Rear
Panel
r O U T P U T 1 r EXTERNAL
- I
R
L
RETURN S E N D
I
lNpLn
I /I