Midi Bulk Dump; Loading Midi Bulk Data - Zoom 9030 Operation Manual

3-5 MlDl Bulk Dump
The bulk dump function can be executed from this page.
UTY3
-
5 BULK DUMP
1
1 PATCH MEM
OK?
Bulk dump is a function that lets you transmit via MIDI all
of the Patch setting and MIDI setting data of the 9030.
Helpful Hint:
When a bulk dump is executed, MIDI system exclusive mes-
sages are transmitted via the MIDI OUT terminal. If you
have a sequencer or computer software program capable of
recording system exclusive messages, you can store all set-
tings of the 9030 to a floppy disk. The bulk dump function
can also be used to copy the data to another 9030.
Select the type of data to be output by using the DEC V/INC
A keys and execute the bulk dump by pressing the
STORE/EXECUTE key. The following types can be selected:
ALL
--
All settings of the 9030
Patch
--
All Patch memories from 1 to 99 (including Patch
names)
SYSTEM
--
Settings of the Utility mode, excluding Patch
names
EDIT BUFFER
-- Data of the edit buffer (including Patch
names)
Functions of the Panel Keys
UTILITY key
--
Moves to the next page (Patch recall).
DEC
V h N C
A keys
--
Set the parameter values.
EDIT c / > keys
--
Pressing the EDIT c key moves back to
page 3-4, and pressing the EDIT > key moves to page 3-6
(MIDI bulk load).
Note:
In order
to
execute the bulk dump, the MIDI/remote mode
parameter (page 47) must be set to MIDI OUT MODE. The
following error message is displayed when this setting has
not been made.
UTY3-5 BULK DUMP
Set to MlDl OUT MODE
3-6 Loading MlDl Bulk Data
This function lets you load data via bulk dump to the internal
memory of the 9030.
I
UTY3-6 BULK LOAD
Now wai t i ng
There is no particular parameter to be set in this display. The
9030 receives system exclusive messages from the MIDI IN
terminal only when this display is called up.
Helpful Hint:
This function is used to reload data to 9030 that was previ-
ously recorded to a sequencer or computer. This display
should also be used when executing a bidirectional data
transfer with a computer, or when receiving
data
from anoth-
er 9030.
Functions of the Panel Keys
UTILITY key
--
Moves
to
the next page (Patch recall).
EDIT <
/
>
keys -- Pressing the EDIT < key moves back to
page 3-5, and pressing the EDIT > key moves to page 3-1.
Note:
In order to execute this bulk load operation, the MIDI/remote
mode parameter (page 47) must be set to MIDI OUT MODE.
The following error message is displayed when this setting
has not been made.
UTY3-6 BULK LOAD
Set to MlDl OUT MODE