Get_Extended_Permanent_Configuration - Siemens DP/AS-Interface Link 20E Manual

Using the Command Interface
3.3.7

Get_Extended_Permanent_Configuration

Purpose
This call reads the following configuration data (configured data) of an addressed
AS-i slave stored on the EEPROM of the AS-i master.
S I/O configuration
S ID code
S Extended ID1 code
S Extended ID2 code
The configuration data are specified by the manufacturer of the AS-i slave. The
meaning of the configuration data is described in /2/.
Structure of the Job Data in the Send Buffer
Byte
0
1
Structure of the Response Data in the Receive Buffer
Byte
Bit 7
0
1
2
3
88
Meaning
Command number 26
Slave address
Meaning
Bit 4 Bit 3
ID code
Extended ID1 code
reserved
reserved
H
Bit 0
I/O configuration
Extended ID2 code
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04