Get_Permanent_Parameter - Siemens DP/AS-Interface Link 20E Manual

3.3.2

Get_Permanent_Parameter

Purpose
With this call, a slave-specific parameter value stored on the EEPROM of the
DP/AS-i Link 20E is read.
Structure of the Job Data in the Send Buffer
Byte
0
1
Structure of the Response Data in the Receive Buffer
Byte
Bit 7
0
DP/AS-Interface Link 20E
Release 11/2002
C79000-G8976-C138–04
Meaning
Command number: 01
Slave address
Meaning
Bit 4 Bit 3
reserved
Using the Command Interface
H
configured parameters
Bit 0
83