Editing The Monitor Display - Sony MB-8N User Manual

To assign all WRU-8N units installed in the MB-8N unit in a single operation

Editing the Monitor Display

Selecting monitor cells
Click the MB-8N icon or host name shown to the right of the icon in the
tree display, and drag to the desired monitor cell.
This assigns all of the WRU-8N units installed in the MB-8N, in
consecutive monitor cells from the target of the drag-and-drop operation.
Notes
• It is not possible to drag to a location such that the units would be
assigned across a page break.
For example, if the monitor cell display is in the 16-channel mode, and
there are four WRU-8N units installed in the MB-8N, then it is not
possible to drag to any of the monitor cells 014 to 016.
• If you drag to a location where a cell is already assigned to a WRU-8N
unit, a confirmation message appears (see previous page) to confirm
overwriting.
To select a single monitor cell
Click the monitor cell.
A green border appears around the monitor cell, indicating that it is
selected.
21