Sony MB-8N User Manual page 27

• LOG Buffer Size: Set the number of lines to be held in the event log
appearing in the event log display.
If you start monitoring with the Sampling check box selected, the AF
and RF levels are recorded to a file (file extension: csv) at the
specified rate (up to 60 times per minute). When 2000 data samples
have been recorded, monitoring automatically stops, and the file save
menu appears.
Note
Using the data recording function may slow down the display. For
normal monitoring, unselect the Sampling check box.
• Check: Specify the interval for carrying out a check.
When there is a check mark in the check box, a check is carried out
at the interval specified in Check Timing.
• PassWord: Set a password required when the MB-8N is in local
mode, to force the MB-8N to remote mode from this software. When
there is a check mark in the PassWord On box, password input is
required to change the MB-8N to remote mode from this software.
(Initial password setting is "sony".)
• Lock: To prevent inadvertent operations when in use, you can lock
screen operations.
When there is a check mark in the check box, no operations are
possible, except for monitor start/stop, page change, the Preferences
menu, and terminating the software. This setting continues next time
the program is started up.
Log Clear: Clear the event log.
Use Color Palette: Display the color palette, and change the color of a
monitor cell number.
To change the color of the cell number, select the monitor cell, then
click on the desired color in the color palette.
27