Spirit XT185 Owner's Manual page 11

XT185 STEP ONE
HARDWARE FOR STEP 1
PART TYPE
132 NUT CLIP
1. Gather HARDWARE FOR STEP 1.
2. Take 6 Speed NUT CLIPS (132) and attach them at
the front and each side of the unit as shown left.
3. Guide the right upright through FRAME BASE
COVER RIGHT (43) and CONSOLE MAST
COVER RIGHT (100).
4. Next take the RIGHT UPRIGHT (4) and attach
the MIDDLE COMPUTER CABLE (38) to the
LOWER COMPUTER CABLE (39). Be careful
not to pinch the cable or damage may occur to the
system.
5. Slide the right upright (4) to sit into the frame base.
6. Repeat from step 3 on the left.
DESCRIPTION QTY
M5
6
11