Descaling Procedure - Saeco Intelia Deluxe HD8906 Manual

Descaling procedure

Note: You can pause the descaling or rinsing cycle by pressing the ESC button. The display will show the
following icon. To continue the descaling or rinsing cycle, press the OK button. (Fig. 19)
1 Remove and empty the drip tray. Slide the drip tray back into the machine.
Note: Remove the AquaClean water filter from the water tank (if present).
2 Fill the milk carafe with fresh water up to the MIN level. Insert the milk carafe into the
machine. Turn the dispensing spout of the milk carafe to the 'I' position.
3 Press the OK button.
The display shows the following icon to remind you have to place the milk carafe in the
,
machine. (Fig. 20)
4 The display shows the following icon to indicate that the machine enters the descaling cycle.
If you want to exit the descaling cycle, press the ESC button. (Fig. 21)
5 Pour the entire bottle of Saeco descaling solution (250ml) into the water tank.
6 Add water to the descaling solution in the water tank up to the CALC CLEAN indication.
7 Place a large container (1.5 l) under the coffee and milk dispensing spouts. (Fig. 22)
8 Press the OK button to start the descaling cycle.
The machine dispenses the entire descaling solution at regular intervals through the coffee
,
and milk dispensing spouts (this takes approximately 25 minutes).
9 Wait until all of the descaling solution has been dispensed. Remove and empty the container
and the milk carafe.
10 Remove and empty the drip tray. Slide the drip tray back into the machine.
11 Rinse the water tank and fill it with fresh water up to the CALC CLEAN indication.
Slide the water tank back into the machine.
12 Filll the milk carafe with fresh water up to the MIN level and place it back into the machine.
Place the container back under both spouts.
13 Press the OK button to start the rinsing cycle (this takes approximately 4 minutes).
The display shows the following icon to indicate that the rinsing cycle is finished. (Fig. 23)
,
14 Rinse the water tank and fill it with fresh water up to the MAX level. Slide the water tank
back into the machine.
15 Press the OK button to end the descaling cycle.
16 Place a container under the coffee and milk dispensing spouts.
17 The display shows the following icon to indicate that the machine is heating up. (Fig. 24)
The machine performs an automatic rinsing cycle.
,
18 Remove and clean the milk carafe see chapter 'Cleaning and maintenance', section 'Weekly
cleaning of the milk carafe'. Insert the water dispensing spout into the machine.
19 Remove and empty the drip tray. Slide the drip tray back into the machine.
20 Remove and rinse the brew group see chapter 'Cleaning and maintenance', section 'Clean the
brew group'.
The machine is now ready for use.
ENGLISH
11