Saeco Intelia Deluxe HD8906 Manual page 10

ENGLISH
10
2 Place a cup under the coffee dispensing spout and press the ESPRESSO button to brew an
espresso.
3 While the machine grinds the coffee, place the end of the measuring spoon handle on the
grinder adjustment knob in the coffee bean hopper. Use the spoon to press and turn the
knob to the left or to the right one notch a time.
4 There are 10 different grinding degree settings you can choose from. The smaller the dot,
the stronger the coffee.
1 Coarse grind: lighter taste, for dark roasted coffee blends.
2 Fine grind: bolder taste, for light roasted coffee blends.
5 Brew 2-3 coffees to taste the difference.
Cappuccino, baby cappuccino and milk froth
Note: You can adjust the cappuccino and milk froth quantity.
1 Remove the hot water dispensing spout. (Fig. 15)
2 Remove the milk carafe lid. Fill the milk carafe with milk to a level between the MIN and
MAX level and place back the lid.
3 Turn the dispensing spout on the milk carafe to 'I' (Fig. 16).
4 Insert the milk carafe into the machine. Make sure the carafe is inserted properly (Fig. 17).
5 Place a cup under the coffee and milk dispensing spouts.
6 Press the CAPPUCCINO button to brew a cappuccino. Press the MILK FROTH button to
brew a milk froth. Press the SPECIAL DRINKS button and select baby cappuccino to brew
a baby cappuccino.
The machine dispenses the beverage according to the preset quantities.
,
Brewing special drinks
In the special drinks menu you can select hot water and baby cappuccino.
1 Press the SPECIAL DRINKS button to enter the menu. The display shows the options for
special drinks.
2 Press the UP/DOWN buttons to scroll through the options on the menu.
3 Press the OK button to confirm the desired beverage.
4 When you select HOT WATER, insert the hot water dispensing spout into the machine and
lock it into place. When you select cappuccino, milk froth or baby cappuccino, insert the milk
carafe into the machine.
Descaling
You have to descale the machine when the display shows the CALC CLEAN icon or after
8 AquaClean filter replacements.
Note: If you do not descale when the display shows the CALC CLEAN icon or after 8 AquaClean filter
replacements, the machine may stop working properly. In this case, repairs are not covered by the
guarantee (Fig. 18).
Never drink the water with descaling mixture that you pour into the water tank or any water
with residues that comes out of the machine during the descaling procedure.
The descaling procedure lasts approximately 30 minutes. Only use the Saeco descaling solution to
descale the machine. The Saeco descaling solution is designed to ensure optimal performance of the
machine. You can buy the Saeco descaling solution in the online shop at www.shop.philips.com/
service.