Drawer Assembly - Step - John Lewis Martha Sleigh cotbed Instruction Manual

Drawer assembly - step 3

Part I
Fixing 7
Part I
Part G
Fixing 7
Fixing 7
Slide the two Drawer bases (Parts I) into the slots in the assembled drawer.
Fit the Drawer back (Part G) onto the rest of the drawer, ensuring that the previously fitted Base parts
fit into the slot.
Secure the Drawer back (Part G) using the remaining six Wood screws (Fixing 7).
Ensure that all fixings are fully tightened before fitting the drawer to the Cot.
Final assembly
To fit the drawer, locate the plastic rollers on the drawer in the channels of the metal drawer runners
on the cot and slide in.
In use
If desired, the Cot can be converted to a Day bed by removing one of the side panels, or to a Toddler
bed by removing both Side panels.
NOTE: If using as either a Day bed or a Toddler bed, the base MUST be in the lowest position.
Once the panels have been removed, check the cot carefully to ensure that no fixings have come loose
and that there is no damage which may affect the strength of the cot.
7