Step by step assembly instructions
Step One
Attach the Side Rails (3) to the Headboard (1) and Footboard (2) using Washer (A)
and JCBC M6 x 25 mm Bolt (B). Tighten using Allen Key (H) as shown in the diagram below.
A
B
1
3
Repeat this for all 4 corners.
2
Step Two
Place the Cross Bars (5) onto the Side Rails (3) and secure using JCBC M6 x 25 mm Bolt (B)
and M6 JCN Nut (D). Tighten using Allen Key (H) as shown below.
3
5
5
3/5