Usb Storage Basic Settings; Add Or Edit A Network Folder - NETGEAR D6300 User Manual

Sharing files with a remote colleague involves the following considerations:
• There are two user accounts: admin and guest. The password for admin is the same one
that you use to access the modem router. By default, it is password. The guest user
account has no password.
• On the FTP site, the person receiving the files should use the guest user account and
enter any password (FTP requires that you type something in the password field).
• Be sure to select the FTP (via Internet) check box in the USB Storage (Advanced
Settings) screen. This option supports both downloading and uploading of files.
Note: You can enable the HTTP (via Internet) option on the USB Storage
(Advanced Settings) screen to share large files. This option supports
downloading files only.

USB Storage Basic Settings

You can view or edit basic settings for the USB storage device attached to your modem
router.
By default, the USB storage device is available to all computers on your local area network
(LAN).
To access your USB device:

1. Click the network device name or the share name in your computer's network folders
list.
2. For SMB://readyshare, click Connect.
Note: If you logged in to the modem router before you connected your USB
device, you might not see your USB device in the modem router
screens until you log out and then log back in again.

Add or Edit a Network Folder

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
D6300 WiFi DSL Modem Router
USB Storage
63