Wi-Fi Protected Setup (Wps) Method - NETGEAR D6300 User Manual

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to
a home network while maintaining security. To use WPS, make sure that all WiFi devices to
be connected to the network are Wi-Fi certified and support WPS. During the connection
process, the client gets the security settings from the modem router so that every device in
the network has the same security settings.
If your WiFi device supports WPS (Push 'N' Connect), use the following procedure.
To use WPS to join the wireless network:

1. Press the WPS button on the modem router top panel.
2. Within 2 minutes, press the WPS button on your WiFi device, or follow the WPS instructions
that came with the device. The device is now connected to your modem router.
3. Repeat steps 1–2 to add other WPS WiFi devices.
D6300 WiFi DSL Modem Router
Get Started with NETGEAR genie
26