Remote Management - NETGEAR D6300 User Manual

This value represents the number of modem routers between your network and the
destination. Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to
1.
13. Click the Apply button.
Your settings are saved.

Remote Management

The remote management feature lets you upgrade or check the status of your WiFi DSL
Modem Router over the Internet.
To set up remote management:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Remote Management.
The Remote Management page displays.
Note: Be sure to change the modem router's default login password to a very
secure password. The ideal password should contain no dictionary
words from any language and contain uppercase and lowercase
letters, numbers, and symbols. It can be up to 30 characters.
5. Select the Turn Remote Management On check box.
6. Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the modem router's remote web management interface.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
• To allow access from a single IP address on the Internet, select Only This
Computer. Enter the IP address that is allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Everyone.
7. Specify the port number for accessing the web management interface.
D6300 WiFi DSL Modem Router
Advanced Settings
111