Add Custom Services To Allow Or Block - NETGEAR D6300 User Manual

• Never. This choice never logs traffic covered by this rule, whether it matches or
not.
f. Click Apply to have your changes take effect, or click Cancel to return to the
previous screen.
6. Inbound Services. To allow or block an inbound service, click here to set up inbound
firewall rules for gaming or other applications. You are redirected to the Port Forwarding/Port
Triggering screen as described in
7. Click the Apply button to enable your Firewall Rules selections.

Add Custom Services to Allow or Block

You can define your own incoming and outgoing custom services to allow or block. Once you
add your own custom services, they are available on the Outbound Services screen (as
described in Firewall Rules
Port Forwarding and Triggering
To add a custom service:

1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Firewall Rules.
The Firewall Rules page displays.
5. Click the Add Custom Service button.
The Add Services page displays.
The Add Service displays allows you to specify or edit your own custom service definition.
You can then use the custom service when creating firewall rules.
6. To add a service for blocking, first determine which port number or range of numbers is used
by the application.
7. In the Name field, enter a suitable name for this service.
8. In the Type list, select the correct type for this service (if in doubt, select TCP/UDP):
• TCP
• UDP
• TCP/UDP
D6300 WiFi DSL Modem Router
Port Forwarding and Triggering
on page 79) and the Inbound Services screen (as described in
on page 100).
Security
82
on page 100.