Back Panel - NETGEAR D6300 User Manual

Back Panel

The back panel has the Power On/Off button and port connections shown in the figure:
1. USB port
2. ADSL line
Figure 3. Back panel port connections
Viewed from left to right, the back panel contains the following elements:
1. USB port for connecting USB storage devices like flash drives, hard drives, or USB
printers.
2. RJ-11 asynchronous DSL (ADSL) port for connecting the modem router to an ADSL line
Note: An ADSL port can send data over an ADSL line at one speed and
receive it at another speed.
3. Four Gigabit Ethernet RJ-45 LAN ports for cabling the modem router to the local computers
4. One Gigabit Ethernet WAN port for connecting the modem router to a fiber or cable
modem
Note: You can use either the ADSL or Gigabit Ethernet port for WAN
connectivity.
5. Reset button
See Factory Settings
button and the factory setting values.
6. Power On/Off button
7. AC power adapter input
D6300 WiFi DSL Modem Router
3. Gigabit Ethernet
LAN ports
4. Gigabit Ethernet
WAN port
on page 128 for information about the Restore Factory Settings
Hardware Setup
13
7. Power
On/Off button
6. AC power
adapter input
5. Reset button