ParaBody GS4 User Manual page 23

FIGURE 22
3/8 X 2-3/4" 9
3/8 X 3" 8
3/8 X 3-3/4" 6
AN
STEP 22:
• Assemble one 3-1/2" PULLEY (35) to the FOOT PLATE (L) using one 3/8 X 3" BOLT (8), two STEP SPACERS 11/16" (27) and one
3/8" LOCK NUT (19). See FIGURE 22.
• Assemble one 3/8 X 2-3/4" BOLT (9) to the FRAME (A) using two 3/8" WASHERS (18) and one 3/8" LOCK NUT (19). See FIGURE
22. (NOTE: The LOW CABLE (AN) should be routed under the retaining bolt as shown in FIGURE 22.)
• Route the small ball end of the LOW CABLE (AN) around one 3-1/2" PULLEY (35) and assemble the PULLEY to the LEG PEDESTAL
(K) using two 3/8 X 3-3/4" BOLTS (6), two STEP SPACERS 1-1/16" (26), two 3/8" WASHERS (18) and two 3/8" LOCK NUTS (19) as
shown in FIGURE 22. (NOTE: The LOW CABLE (AN) should be routed over the retaining bolt as shown in FIGURE 22.)
1/2
0
K
18
27
18
26
1/2 1/2
1 2
A
L
35
1/2
3 4
23
19
19
1/2 1/2
5
6