Siemens Simatic ET 200SP Manual page 30

Parameter data record
A.2 Parameter assignment and structure of the parameter data record
Image A-3
Codes for measurement types
The following table contains the codes for the measuring types of the analog input module.
You must enter these codes at byte x (see previous figure).
Table A- 1
Measurement type
Deactivated
Voltage
Codes for measuring ranges
The following table contains the codes for the measuring ranges of the analog input module.
You enter these codes at byte x+1 (see previous figure).
Table A- 2
Measurement type
Voltage
±5 V
±10 V
1 to 5 V
0 to 10 V
30
Structure of bytes x to x+17 for channels 0 and 1
Codes for measurement types
Codes for measuring ranges
Code
0000 0000
0000 0001
Code
0000 1000
0000 1001
0000 1010
0000 1011
Analog input module AI 2xU ST (6ES7134-6FB00-0BA1)
Manual, 12/2015, A5E36104728-AA