View Alerts - NETGEAR LB1110 User Manual

Note If you did not select the Remember me check box when you logged in previously, a
limited Dashboard page displays. In the Sign In field, enter the modem password
and click the Sign In button. The default password is password (case-sensitive).
The Enable Data Alerts check box and slider display only after you specify a plan limit for the data
counter.
3. Make sure that the Enable Data Alerts check box is selected.
By default, the Enable Data Alerts check box is selected.
4. Move the slider to set the percentage of the data that is still available on your plan limit.
The percentage displays next to the Enable Data Alerts check box.
Your settings are saved. (You do not need to click a Submit button.)
If you set up SMS alerts messages, the modem generates data limit warnings for SMS alert messages
if the data counter falls below the specified percentage.

View Alerts

Your modem displays alerts to advise you of device status changes.
Note Alerts remain displayed as long as the issues that cause them are active. When the
issues are resolved, the alerts are removed automatically.
To view alerts:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
Manage the Modem and Monitor Usage and the Network
LTE Modem LB1110 and LB1111
69