Use The Modem's Web Pages To Reset The Modem To Factory Defaults; View Monthly Data And Session Data Usage - NETGEAR LB1110 User Manual

Use the Modem's Web Pages to Reset the Modem to Factory
Defaults
CAUTION:
This process erases all settings that you configured in the modem.
To reset the modem to factory default settings with the modem's web pages:
1. Launch a web browser from a device that is connected to the modem.
The device can be a computer that is directly connected to the modem or a client from a router that is
connected to the modem.
2. In the address field of your browser, enter http://192.168.5.1.
The Dashboard page displays.
Note If you did not select the Remember me check box when you logged in previously, a
limited Dashboard page displays. In the Sign In field, enter the modem password
and click the Sign In button. The default password is password (case-sensitive).
3. Select Settings > General > Software and Reset.
4. In the Factory Reset section, click the Reset button.
The configuration is reset to factory default settings. When the restoration is complete, the modem
restarts.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the restoration.
For example, do not close the browser, click a link, or load a new page. Do
not turn off the modem.

View Monthly Data and Session Data Usage

You can view an estimate of your data usage since the start of the billing cycle as well as the data usage
and time that passed since the modem connected to the mobile broadband network in the current session.
The plan data counter resets automatically when the next billing cycle starts, and the session data counter
resets automatically for each session. You can also change the billing start date for display only or reset
the data counter (see
Manage the Modem and Monitor Usage and the Network
LTE Modem LB1110 and LB1111
Change the Billing Cycle Counter or Reset the Data Counter
60
on page 62).