Sharp AR-M550N Service Manual page 321

: Feb. 9 2004
1
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0 50
3.3.0 50 4.4.0 50
6.AUTO(H) 50 7.1.0(H)
9.3.0(H) 50 10.4.0(H)
Select other than 0 - 11, and
press [START] key.
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
46-27
Purpose Adjustment
Function Used to adjust the gamma (density gradient) of the
(Purpose) network scanner mode.
Section
Item Picture quality
Operation/Procedure
(Scanner mode selection)
1) Select the number corresponding to the scanner mode to be
adjusted with 10-key. (Select one of 1 - 9.)
2) Press [START] key.
(Gamma adjustment)
1) Enter the gamma level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the gamma is, result-
ing in a higher contrast.
Item
1 OC_Fine.HT Fine text (Half-tone) (OC)
2 OC_SFine.HT Super fine (Half-tone) (OC)
3 OC_UFine.HT Ultra fine (Half-tone) (OC)
4 SPF_Fine.HT Fine text (Half-tone) (SPF)
5 SPF_SFine.HT Super fine (Half-tone) (SPF)
6 SPF_UFine.HT Ultra fine (Half-tone) (SPF)
7 CIS_Fine.HT Fine text (Half-tone) (CIS)
8 CIS_SFine.HT Super fine (Half-tone) (CIS)
9 CIS_UFine.HT Ultra fine (Half-tone) (CIS)
Set
Default
range
0 - 99
2.2.0 50
5.5.0 50
50 8.2.0(H) 50
50 11.5.0(H) 50
Press [START] key, or
press [CUSTOM SETTINGS] key.
50
Set
Default
range
0 - 127
AR-M550/M620/M700 SIMULATION 8 - 63
SIMULATION 46-27
GAMMA SETUP(SCNNER), SELECT 1-9, AND PRESS START.
1.OC_Fine.HT
4.SPF_Fine.HT
7.CIS_Fine.HT
50
46-31
Purpose Adjustment
Function Used to adjust sharpness of the copy mode.
(Purpose)
Section
Item Picture quality
Operation/Procedure
(Copy mode selection)
1) Select the number corresponding to the copy mode to be adjusted
with 10-key. (Select one of 1 - 16.)
2) Press [START] key.
(Sharpness adjustment)
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
1 OC_AE
2 OC_CHARA
3 OC_MIX
4 OC_PHOTO
5 SPF1_AE
6 SPF1_CHARA
7 SPF1_MIX
8 SPF1_PHOTO
9 SPF2_AE
10 SPF2_CHARA
11 SPF2_MIX
12 SPF2_PHOTO
13 CIS_AE
14 CIS_CHARA
1
15 CIS_MIX
16 CIS_PHOTO
∗ SPF1: DSPF front surface (CCD)
∗ SPF2: DSPF back surface (CCD)
SIMULATION 46-31
1
SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS START.
1.OC_AE 3
4.OC_PHOTO
7.SPF1_MIX
10.SPF2_CHARA
13.CIS_AE
16.CIS_PHOTO
Press [START] key.
64
SIMULATION 46-31
SHARPNESS LEVEL SETUP. INPUT VALUE 0-3, AND PRESS
START.
1.OC_AE
64 2.OC_SFine.HT 64 3.OC_UFine.HT
64 5.SPF_SFine.HT 64 6.SPF_UFine.HT
64 8.CIS_SFine.HT 64 9.CIS_UFine.HT
Item
AE mode (OC)
Text mode (OC)
Text/Photo mode (OC)
Photo mode (OC)
AE mode (SPF1)
Text mode (SPF1)
Text/Photo mode (SPF1)
Photo mode (SPF1)
AE mode (SPF2)
Text mode (SPF2)
Text/Photo mode (SPF2)
Photo mode (SPF2)
AE mode (CIS)
Text mode (CIS)
Text/Photo mode (CIS)
Photo mode (CIS)
2.OC_CHARA 3 3.OC_MIX
3 5.SPF1_AE 3 6.SPF1_CHARA
3 8.SPF1_PHOTO 3 9.SPF2_AE
3 11.SPF2_MIX 3 12.SPF2_PHOTO
3 14.CIS_CHARA 4 15.CIS_MIX
3
Press [CUSTOM SETTINGS] key.
64
64
64
Set
Default
range
1 - 5 3
4
3
3
3
3
3
3