Paper Cooling Fan Motor 2; Fusing Cooling Fan Motor 2 - Sharp AR-M550N Service Manual

: Feb. 6 2004
1
3) Disconnect the connector, and remove the DV fan.
1
a-2. Paper cooling fan motor 2
1) Remove the rear cabinet and the rear cabinet upper.
1
2) Disconnect the connector, and remove the paper cooling fan
motor.
1
NOTE: When installing, arrange so that the arrow mark on the side of
the duct faces in the same direction with the arrow mark on
the side of the fan.
a-3. Fusing cooling fan motor 2
1) Remove the rear cabinet. (See "a-1. Developing cooling fan motor"
in this section)
2) Remove the tray.
Fan blowing direction
Fan blowing direction
AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 154
3) Remove the left cover cabinet.
1
4) Open the left door.
5) Remove the left cabinet upper.
6) Disconnect the connector, and remove the paper exit rear duct
unit.