Table of Contents
Advertisement
Control keys for editing commands
Function
Beginning of line
End of line
Back one character
Forward one character
Delete current character CTRL+D
Previous command
Next command
Abort line
Using command shortcuts
You can abbreviate commands and command options to the smallest number of non ambiguous
characters. For example, the command get system status can be abbreviated to g sy st .
Using command help
You can press the tab key or the question mark (?) key to display command Help.
•
Press the tab key or the question mark (?) key at the command prompt to display a list of the
commands available and a description of each command
•
Type a command followed by a space and press the tab key or the question mark (?) key to display a
list of the options available for that command and a description of each option
•
Type a command followed by an option and press the tab key or the question mark (?) key to display
a list of additional options available for that command-option combination and a description of each
option
Installing firmware from a TFTP server
D-Lnk releases new versions of the DFL-1000 firmware periodically. When D-Lnk releases new firmware,
you can download the upgrade from our Web site (http://tsd.dlink.com.tw). You can save this file on your
management computer and then use the following procedure to upgrade the firmware on your DFL-1000.
This procedure deletes all of the changes that you have made to the DFL-1000 configuration and reverts the
system to its default configuration, including resetting interface addresses. Before installing new firmware make
sure you download your configuration file, see
You can also upgrade the DFL-1000 from the web-based manager (see
To install a firmware upgrade using the CLI:
•
Configure a TFTP server on one of the computers on your internal network.
The TFTP server should be on the same subnet as the internal interface of the DFL-1000.
You can download a TFTP server from:
http://site.ifrance.com/freewares/P_tftpd32.htm.
•
Make sure the TFTP server is running.
DFL-1000 User's Manual
Key combination
CTRL+A
CTRL+E
CTRL+B
CTRL+F
CTRL+P
CTRL+N
CTRL+C
Backing up system
settings.
Upgrading the DFL-1000
firmware).
106
Advertisement
Table of Contents
