D-Link DFL-1000 User Manual page 103

string set/trap community string must be added to the SNMP monitoring software.
First Trap
Receiver IP
Optionally specify the IP address of the SNMP monitor to which to send traps.
Address
Second Trap
Receiver IP
Optionally specify the IP address of a second SNMP monitor to which to send traps.
Address
Third Trap
Receiver IP
Optionally specify the IP address of a third SNMP monitor to which to send traps.
Address
•
Click Apply.
Sample SNMP configuration:
DFL-1000 User's Manual
103