Table of Contents
Advertisement
Environmental specifications
•
Operating Temperature: 32 to 104 °F (0 to 40 °C)
•
Storage Temperature: -13 to 158 °F (-25 to 70 °C)
•
Humidity: 5 to 95% non-condensing
Powering on the DFL-1000
To power on the DFL-1000:
•
Make sure the power switch on the back of the DFL-1000 is turned off.
•
Connect the power cord to the power connection at the back of the DFL-1000.
•
Connect the power cord to a power outlet.
•
Turn on the power switch.
The DFL-1000 starts up. The Power and Status lights light. The Status light flashes while the DFL-1000 is
starting up and remains lit when the system is up and running.
Using the Quick Setup Wizard
Use the procedures in this section to connect to the web-based manager and use the Quick Start Wizard
to create your initial DFL-1000 configuration.
Connecting to the web-based manager
To connect to the web-based manager you require:
•
A computer with an ethernet connection
•
Internet Explorer version 4.0 or higher
•
A crossover cable or an ethernet hub and two ethernet cables
To connect to the web-based manager:
•
Set the IP address of the computer with an ethernet connection to the static IP address 192.168.1.2
and a netmask of 255.255.255.0.
•
Using the crossover cable or the ethernet cables and the hub, connect the Internal interface of the
DFL-1000 and the computer ethernet connection.
•
Start Internet Explorer and browse to the address https://192.168.1.99 .
The DFL-1000 login page appears.
•
Type admin in the Name field and click Login.
DFL-1000 User's Manual
18
Advertisement
Table of Contents
