Changing Web-Based Manager Options; Adding And Editing Administrator Accounts - D-Link DFL-1000 User Manual

Example date and time setting:

Changing web-based manager options

You can change the web-based manager idle timeout.
•
Go to System > Config > Options .
•
Set the web-based manager idle time-out.
Set the idle time-out to control the amount of inactive time that the web-based manager waits before
requiring the administrator to log in again.
The default time-out is 5 minutes. The maximum time-out that can be set is 480 minutes (8 hours).
•
Click Apply.
The appearance of the web-based manager changes.

Adding and editing administrator accounts

When the DFL-1000 is initially installed, it is configured with a single administrator account. This
administrator has permission to change all DFL-1000 settings.
From the web-based manager, you can add administrator accounts and control their level of
administrative access. You can also control the addresses from which administrators can access the
DFL-1000.
This section contains the following procedures:
•
Adding new administrator accounts
•
Editing administrator accounts
Adding new administrator accounts
Use the following procedure to add new administrator accounts to the DFL-1000 and control their
permission levels.
•
Go to System > Config > Admin .
•
Click New to add an administrator account.
•
Type a login name for the administrator account.
•
Type and confirm a password for the administrator account.
The password must be at least 6 characters long and may contain numbers (0-9) and upper and
lower case letters (A-Z, a-z) but no spaces.
DFL-1000 User's Manual
101