Autoconfiguration - D-Link DIR-803 User Manual

Section 3 - Configuration
My IPv6 Connection is: Select Autoconfiguration (SLAAC/DHCPv6) from the drop-
down menu.
IPv6 DNS Settings: Select either Obtain IPv6 DNS Servers automatically or Use
the following IPv6 DNS servers.
Primary/Secondary IPv6 If you selected the second option above, enter the Primary and
DNS Server: Secondary DNS Server addresses.
Enable DHCP-PD: Check this box to Enable DHCP-PD (prefix delegation).
LAN IPv6 Address: Enter the LAN (local) IPv6 Address for the router.
LAN IPv6 Link-Local
Displays the Router's LAN IPv6 Link-Local Address.
Address:
Enable Automatic IPv6 Check to enable the Autoconfiguration feature.
address assignment:
Enable Automatic Check this box to Enable Automatic DHCP-PD in LAN.
DHCP-PD in LAN:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Autoconfiguration Type:
DHCP.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
Click Save Settings.
D-Link DIR-803 User Manual

Autoconfiguration

59