Autoconfiguration - D-Link DIR-655 User Manual

Section 3 - Configuration
My IPv6 Connection: Select Autoconfiguration. (Stateless/DHCPv6) from the drop-
down menu.
IPv6 DNS Settings: Select either Obtain.DNS.server.address.automatically or Use.
the.following.DNS.Address.
Primary/Secondary DNS
Enter the primary and secondary DNS server addresses.
Address:
Enable DHCP-PD:
Check to enable the DHCP-PD feature.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address:
Displays the router's LAN link-local address.
Enable Automatic IPv6
Check to enable the autoconfiguration feature.
Address Assignment:
Enable Automatic
Check to enable automatic DHCP-PD in LAN.
DHCP-PD in LAN:
Autoconfiguration Type: Select Stateful.(DHCPv6), SLAAC.+.RDNSS, or SLAAC.+.Stateless.
DHCPv6.
IPv6 Address Range Start:
Enter the start IPv6 address for the DHCPv6 range for your local
computers.
IPv6 Address Range End:
Enter the end IPv6 address for the DHCPv6 range for your local
computers.
IPv6 Address Lifetime: Enter the IPv6 address lifetime (in minutes).
D-Link DIR-655 User Manual

Autoconfiguration

47