D-Link DIR-803 User Manual page 61

Section 3 - Configuration
Tunneling Connection (6rd)
If you select the Tunneling Connection (6rd) option, you must obtain the information listed below from your ISP. Then you can configure the IPv6
6rd tunneling connection settings.
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used
here.
IPv4 Address: Enter the IPv4 Address used here.
Mask Length: Enter the IPv4 Mask Length used here.
Assigned IPv6 Prefix: Displays the Assigned IPv6 Prefix value here.
6rd Border Relay IPv4 Enter the 6rd Border Relay IPv4 Address used
Address: here.
IPv6 DNS Server: Enter the primary IPv6 DNS Server address used
here.
Click Next to continue.
The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect
button to save your settings and reboot the router.
If you need to make changes, click on the Prev button to return to the previous
page. Or click on Cancel to discard all the changes made and return to the main
page.
D-Link DIR-803 User Manual 56