Reset Router/Forgot Password - D-Link DIR-803 User Manual

Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change
all your settings back to the factory defaults.
To reset the router, locate the reset button (hole) on the back of the unit. With the router
powered on, use a paper clip to hold the button down for at least six seconds. Release the
button and the router will go through its reboot process. Wait about 30 seconds to access
the router. To re-configure the router, refer to
D-Link DIR-803 User Manual
"Configuration" on page 13.
Reset Router/
Forgot
Password
121