D-Link DIR-803 User Manual page 15

Section 2 - Installation
5. Plug the power adapter into the power receptor on the back of your router and connect to an available power
outlet or surge protector.
6. After the router has powered up, verify that the power and Internet LEDs are both lit. Please skip to
on page 13 for your router configuration choices. If you did not connect to the Internet, you can use the D-Link
Setup Wizard (refer to
D-Link DIR-803 User Manual
Modem
"Quick Setup Wizard" on page
Computer
RESET
4 3 LAN 2 1 INTERNET 5V 1A
DIR-803
14).
"Configuration"
10