4
Factory default reset of D-Link (DIR-850L) Router
If the device is no't accessible from the router setting page, you can reset to factory default
setting by pressing the reset button:
1.
Confirm the D-Link router is switched on.
2.
Press and hold the reset button using a sharp object about ten seconds until the Power
LED turns from orange to green.
3.
Default Setting:
Password
Nil(Blank)
The Reset Button is located at the bottom of the device.
HKBN_SETUP_ROUTER_DLINK_ENG_230315
IP Address
192.168.0.1
Reset Button (Bottom side)
Factory default reset of
Factory default reset of D-
Link (DIR-850L) Router
LevelOne Router
12