Rinnai RHFE-557FT Manual page 23

I not flue into natural draught flues or fireplaces,
is unit can only be used with one of the six
oes of Rinnai flue kits.
I not flue unit into other rooms.
ue terminal must be outside.
lue may be positioned directly under opening
indows, with a minimum clearance of 150 mm.
LUE SIZES:
Flue lengths are available.
A flue suits wall 75 - 115 mm
flue suits wall 115 - 240 mm
, flue suits wall 240 - 400 mm
; flue suits wall 400 - 600 mm
I flue suits wall 600 - 800 mm
flue suits wall 800 - 1000 mm
;o-ax flue also available.
;NOW AREAS
n areas subject to heavy snowfall, keep snow
Year of flue terminal at all times.
STANDARD INSTALLATION OF FLUE MANIFOLD.
Diagram below shows minimum clearances and
distances from obstructions. Also check local
regulations.
Flammable
oppoz
Wall
FI oor
mm
;ite
Side Clearances
FIT BACK COVERS (SIDES ONLY)
Fit back covers (sides only) as shown below.
Secure wit
Screws
GAS CONNECTI
A
Secure
Screws
Fit suitable copper flare elbow to appliance inlet.
-23-