Rinnai RHFE-557FT Manual page 22

When positioning the heater the main points
governing the location are:
1. Flueing
2. Warm air distribution
This heater must not be installed where curtains
or other combustible materials could come into
contact with it.
In some cases curtains may need restraining.
See diagram
for other recommended
clearances.
I
1
0
100
100
0
1000
(mm)
,
I
Flue fittings must be kept clear of flammable
materials.
This heater is not designed to be built in.
I
I
The flue is not designed to be positioned under
floors, or below the level of the heater.
The flue terminal should be positioned away
from flammable materials.
Flue Termmal
-22-