Rinnai RHFE-557FT Manual page 13

When the appliance is first plugged in and then turned on, the Digital Display will show - - : - -.
As an example, let's set the clock to lo:35 am.
i TIMER/CLOCK SET INDICATOR J
SWITCH INDICATOR
TIMEFVTEMP ADJUSTMENT ') j
TIMER/CLOCK SET
OPEN THE CONTROL PANEL-SEE PAGE 9.
0
1
r-
1
I\
When the appliance is first plugged in or after a
power failure, the Digital Display will show - - : - -.
Press the Set Times button once, the Clock
Indicator will flash.
L-l
r--j Press and hold the "A" button; the minutes will
begin to change first, then the time will change by
whole hours. Release the button when AM 10:00
shows on the Digital Display. Confirm that you
have selected AM, a small indicator on the left
/
I I
hand side of the Digital Display indicates the AM
setting.
Press and hold the "A" button again, release the
i button when AM lo:35 shows. If you go past
: AM 10:35, then the "V" button can be used to
change the time settings in reverse.
0
3
7 Press the Timer Set button five times to lock
in and complete setting the time. The Clock and
Timer indicators will go out. A small indicator
on the Digital Display will flash to show that the
\
clock is operating.
Clock .-
T\mer 1 . .
Timer 2
l
On
l
Off
-13-