Video Output Signals And Servo Reference; Signal - Panasonic AJ-SD965 Operating Instructions Manual

Video output signals and servo reference signal
This section explains how the output signals and servo
reference signal are selected.
External synchronization of video
output signals
The video output signals are output in synchronization
with the REF VIDEO input signal or video input signal.
As shown in the figure below, this signal is selected in
accordance with the setup menu settings, VTR mode
and availability of the video input signal.
Start
EXT
What is the
setup menu No. 304 (SERVO
REF) setting?
Is the unit
in one of the editing
modes?
Has the unit
been set to the recording
mode?
Is the
REF VIDEO input signal
available?
Internal synchronization
AUTO/AUTO1
YES
NO
YES
NO
REF VIDEO input signal
YES
NO
Synchronization with the
REF VIDEO input signal
<Notes>
Synchronization is determined as follows depending
on the availability of the REF VIDEO input signal when
"BB", "CB100" or "CB75" has been selected as the
setup menu No. 600 (INT SG) setting.
O When the REF VIDEO input signal is available:
Synchronization with the REF VIDEO input signal
O When the REF VIDEO input signal is not available:
Internal synchronization
N-VF
NO
Is the
available?
YES AUTO
NO
NON-STD
NON-STD
What is the
setup menu No. 601 (OUT
VSYNC) setting?
VF
What is the
setup menu No. 304 (SERVO
REF) setting?
AUTO1
Is the
video input signal available?
YES
Is the
video input signal a composite

signal?

YES
What is
the setup menu No. 303
(STD/NON-STD)
setting?
AUTO
Is the
video input signal a standard
or non-standard signal?
STD
Synchronization with
the video input signal
NO
STD
65