Video - Panasonic AJ-SD965 Operating Instructions Manual

Setup menus
(continued)
USER menu
<VIDEO>
No./Item
600 This selects the internal reference signal.
INT SG 0001
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003 CB75 :
75% color bars are generated.
601 This selects whether to float the vertical sync
position of the video output in order to align
OUT VSYNC the video output phase with the input in the
EE/record/edit modes.
0000 N-VF : Signals are not floated.
0001
602 This selects whether to mute the video
output signals when a blank on the tape has
V-MUTE SEL been detected during playback.
0000 N-MUTE : No muting. (Freeze)
0001 LOW RF : Muting. (Set to gray.)
603 This selects ON or OFF for the closed
caption signal of the first field.
CC (F1) BLANK
0000 BLANK : Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
<Note>
This setup menu is not displayed in the 625i
system.
604 This selects ON or OFF for the closed
caption signal of the second field.
CC (F2) BLANK
0000 BLANK : Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
<Note>
This setup menu is not displayed in the 625i
system.
605 This selects the freeze mode for still
pictures.
FREEZE SEL
0000 FIELD : Field freeze.
0001 FRAME : Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.
606 This selects chroma color killer processing
for the video output signals.
OUT C KILL
0000
0001 COLOR : Color signals are output.
The underlined items indicates the initial setting.
Description
BB :
VF : Signals are floated.
B/W : No color signals are output.
No./Item
609 This selects whether to superimpose EDH
onto the SDI output signals.
EDH
0000 OFF : EDH is not superimposed.
0001
<Note>
Even when ON is selected for this setting, EDH
is not superimposed onto the signals output from
the SDI OUT 3 connector if the SUPER switch
on the front panel of the unit is set to ON.
610 This selects the analog component input
level.
P /P IN LV
B R
0000 M I I : M II level
0001 B-CAM : ß-CAM level
<Notes>
OThis setup menu is not displayed in the 625i
system.
OWhen no optional board (AJ-YA931G) has
been installed, setup menu No. 610 is not
displayed.
611 This selects Y/C separation processing for
the composite input signals.
YC SEP MODE
0000 B/W :
The signals are processed as B/W signals.
0001 AUTO :
The signals are automatically detected.
<Note>
When no optional board (AJ-YA931G) has been
installed, setup menu No. 611 is not displayed.
614 This selects the analog component output
level.
P /P OUT LV
B R
0000 M I I : M II level
0001 B-CAM : ß-CAM level
<Note>
This setup menu is not displayed in the 625i
system.
618 This selects the interpolation operation.
Vertical interpolation is conducted automatically
INTERPOLATE during slow-motion playback to reduce the
vertical movement of the playback pictures.
However,
interpolation operation to be forcibly turned off.
0000 OFF :
Interpolation is forcibly turned off.
0001 AUTO :
Interpolation is automatically turned on during
slow-motion playback.
Description
ON : EDH is superimposed.
this menu item enables the
51